>> New vision website
>> File Download
>> Contact
>> Brazed PHE
     Brazed PHE Features
     Brazed PHE Models Data
     BL14 / BL14A
     BL20
     BL26
     BL26C
     BL50C/BL50D
     BL95A/BL95B
     BL100
     BL200A/ BL200B
>> Condenser & Evaporator selection
>> Brazed PHE Installation Guide
>> Gasket PHE
     Gasket PHE Features
     Gasket PHE Models Data
     BB60/ M6
     BB100/ M10
     BB150/ M15
     BB200/ M20
     BB250/ MX25B
     BH300/ M30
     BH30/ M3
     BTL10B/ TL10B
     BTS6M TS6M
     BTS20M/ TS20M
>>  Gasket PHE Spares
     Plates & Gasket features
     Gaskets list
     Plates list
>> PHE Application
     Heating Applications
     Solar Heat
     Sanitary PHE
     Cooling Application
     Oil Cooler
>> Air cross plate heat exchanger
Contact Information:
Add: No.33 Xicheng Road JiangYin, China
Post Code:214431
Tel: +86-510-86020253
Fax: +86-510-86020233
Email: info@bd-heatech.com
SKYPE: Johnqi77
MSN: guodongqi119@hotmail.com

 

Baode Brazed plate heat exchanger BL26C
Max Pressure (Mpa) 3
Test Pressure (Mpa) 4.5
Volum Per Channel (L) 0.05
Exchange area (m2) 0.03
Max Tempt (≧) 225
A 124
B 304
C 70
D 250
E 10+2.35n
Detailed Product Description
 

Copper Brazed Heat Exchanger Oil Cooler Stainless Steel AISI 316 Plates 10C - 225C

Description
Heat exchangers are used to exchange heat between two fluids. Plate heat exchangers are high performance components
and provide a high level of efficiency combined with compact dimensions and low weight. Their efficiency reduces the amount of cooling water required for heat transfer which results in low operating costs.

Features
Plates and connections are manufactured from stainless steel to AISI 316, vacuum brazed with cooper. The special moulding of the plates produces the turbulent flow necessary for effective heat transfer and provides the plate heat exchanger with a high level of mechanical strength.
 

Operating Details
Medium:
Water glycol
HFC operating fluids
Water
Oil

Contamination
The quantity of particles in suspension should be less than 10 mg/l, particle size <0.6mm
Thread like particles cause a rapid rise in pressure drops.
 
Temperature range:
10C to 225C (freezing point and boiling point must be taken into consideration)
 
Pressure:
Max 45 bar up to 225C, testing pressure 60 bar.
 
Corrosion
The following limits refer to a PH value of 7
Free chlorine. CL2<0.5ppm
Chloride ions CL
<700 ppm at 20C
<200 ppm at 50C
 
Other limits
PH7-10
SULPHATE so4  2-<100 ppm
[HCO3]/[SO4 2-]>1
Ammonia, NH3< 10 ppm
Free co< 10 ppm

The following ions are not corrosive under normal conditions:
Phosphate, nitrate, nitrite, iron, manganese, sodium and potassium
Hydraulic oil cooling, Electricity and cogeneration applications, marine oil cooling, turbine engine oil cooler, automotive, construction, railways, steel industry can replace Hydac oil cooler.
 

copy right@ Baode Heat Exchanger Co.,Ltd. 2009